SD-101 multi-function main controller LS-100150 pass detector

The power supply voltage can work stably within the range of AC85-264V, which is the best choice for areas with unstable power supply. For continuous stamping design, instead of manual monitoring, material interruption, bending extrusion, insufficient feeding, excessive feeding, poor blanking, finished product blowing, etc., the shutdown can be detected in time to ensure the mold and punch. SD-101 multi-function main controller: 1. Simple installation and diversified applications. 2. Each circuit can be switched between A (commonly used) and B (normally closed) detection modes. 3. Each circuit can have indicator lights, making it easy to find the cause of the shutdown. 4. Power supply voltage: AC85-264V. 5. Two sets of contact outputs (AC240V5A, Cos￠=1). 6. Various sensors such as proximity, micro-motion, photoelectric...etc can be installed. 7. The reaction speed is below 20m/s. LS-100/150 pass detector: 1. High-sensitivity infrared light curtain reflection type, with the best stability. 2. The maximum response speed is 100m/s￠2 or more transparent objects can be detected. 3. The setting distance is 150mm-1000mm, and the sensitivity can be adjusted. 4. Static objects will not be detected (such as templates, etc.). 5. The power supply voltage is DC12V, which can be directly matched with SD-101.