Stamping peripheral equipmentDesign/manufacture/sales
Tel:      0532-81103591 13605329843
Your location: Home > News >  Frequently asked questions

Punch 3-in-1 feeder automatic loading steps

2020-04-20

Punching machine technology continues to develop today, there are constantly innovative equipment launched, the traditional manual and semi-automatic production line is about to be eliminated, the use of fully automatic punching machine three in one feedi...

With the continuous development of press technology and the introduction of innovative equipment, the traditional manual and semi-automatic production lines will soon be eliminated and the usage of fully automatic Stamping Press Feeder machines combo 3-in-1 is the future trend. The unique structure of the punching machine feeder is designed to integrate the actions that require more than one piece of equipment into one that can automatically load, feeding, feeder and unload the entire action. Today we will introduce you to the steps of the 3-in-1 automatic feeding machine, and hope to help you. 
Punch  3 in 1 feeder machine automatic feeding steps 
First of all, after the three-in-one feeder is started, the feeder frame tension cylinder drives the drive rod axially forward, the drive rod drives the tension plate forward, and the tension plate drives the sliding sleeve forward through the tension rod.
The sliding sleeve drives the inner guiding tilt block forward, under the action of the outer guiding tilt block, and under the guiding action of the sliding block, the connecting block and the curved tray material tile plate move towards the centre, the diameter of the material frame becomes smaller, of course, if the inner hole of the roll material is large enough, the step of reducing the diameter of the material frame can also be omitted, then the roll material is put into the material frame through the feeding trolley, and the feeding is completed.
Three in one feeding trolley
The clever structural design of the 3-in-1 feeder has won the hearts of customers, and the feeder manufacturer has customised multiple styles to meet market demand, such as thick and thin, and medium plate, for stamping material thicknesses. This time, there are also common servo deflection feeders to make the operation of punching machine feeding easier, the whole stamping loading, feeding, feeding process is more convenient.