The reason for the hot sales of servo automatic feeder
The reason for the hot sales of servo automatic feeder
In general, there are many types of stamping press feeders, why servo automatic feeder sales are the hottest? From the data of recent years, servo type has accounted for more than eighty percent of the market, what is the reason for this? After reading the following introduction, you will the reason.
1. Servo automatic feeder has a vertical servo electric control panel, the choice of physical keys, hand crank control, and touch soft key design function, through the touch screen to complete the feeding speed, the number of settings. Easy to operate, digital operation is more accurate.
2. Individually designed trial handle, can quickly adjust the servo feeder, with imported quality control drive system, comes with detection also alarm prompt feedback function, quickly find the cause of failure.
3 The servo feeder uses a touch screen to write the operating parameters into the PLC, which drives the servo motor by means of pulse commands. The servo motor drives the lower rollers through a synchronous pulley drive and the lower rollers drive the upper rollers through gears. The feeding is accurate and the entire control system is controlled by an advanced CNC system, whose operation is completely independent of external factors and has irreplaceable advantages in terms of technology and structure
4.Servo automatic feeding machine adopts a full set of Japanese control system to control the operation. Feeding accuracy is generally ±0.02mm, short distance feeding can reach ±0.01mm. feeding steps can be freely adjusted in the range of 0-10m, with multi-stage feeding function. Multiple groups of different feed lengths can be entered according to actual requirements. Each group can be used for 0-999 stamping and can be used for modern and diverse processing and production line requirements.
What’s more, the servo automatic feeder can sell hot for another reason, that is, its wide range of applications, matching models, such as mechanical type, pneumatic type, for materials can be divided into, medium plate feeder, thick plate, high strength plate, left and right moving swing type, and other models at the same time can also be customized according to scientific research.
In addition, it can be used not only with punching machines, but also with shearing machines, forming machines and many other types of machines, which are widely used.
Servo feeders are available in a wide range of models, including pneumatic, mechanical, thin plate, medium plate, thick plate, strong thick plate, yaw, etc. The models, highly customisable, can be used for stamping production on all types of presses and can also be used with other types of machines such as shears, forming machines, etc. The range of application is greatly improved.
