Unwinding and leveling machine not working for long span? Have you done the care
Unwinding and leveling machine not working for long span? Have you done the care
Why some customers will be worried about the uncoiling and leveling machine does not work, while some customers with ten or twenty years can still be good it, the reason is that have you usually done the feeding machine or leveling machine maintenance and maintenance well? Any kind of machinery and equipment in addition to good use habits, daily maintenance and maintenance is extremely important, can effectively improve the stability and use of years, many friends may ask again will not do how to do? Today I will give you a collation of the daily maintenance and maintenance of the uncoiling and leveling machine all the methods.
We want to do a good job of uncoiling and leveling machine maintenance and maintenance, mainly divided into three stages, different areas to carry out.
The first stage is the daily maintenance and maintenance area
1, in the material before machine working, you need to open the uncoiling and leveling machine firstly for a trial run to check whether the machine is running normally, listen carefully to the machine running with or without abnormal sound (if there is a noise, please follow the machine supporting the uncoiler leveller manual in the failure column has listed items one by one to exclude to solve, if the noise can not be lifted please immediately contact the nearest service personnel).
2、Check the surface of the gears from the transparent window of the leveler head to see if there is grease, if not, please add it in time to prevent the gears from wearing out too fast.
3、At the end of the use of the machine, check to make sure that the power supply is turned off and the air supply is turned off. If the surface of the uncoiling and leveling machine has accumulated waste chips, dust, etc., it should be cleaned and wiped in time to avoid its entry into the correction roller.
4、Check whether the external power supply and air source are stable (check the air source of the press arm machine and thick plate machine, the standard medium plate uncoiling and leveling machine does not use external air source), if the air source is not stable, it will cause the correction pulling material to slip and affect the material correction accuracy and surface finish.
5, check the material after correction out of the surface has no sassafras, indentation, if there is please promptly clean the roller.
The second stage is for each month need maintenance and maintenance of the area
Turn off the external power supply of the whole machine, check whether the uncoiler table spindle grease is sufficient, whether the surface of the leveller chain is worn, whether there is enough grease, check whether the gear surface is worn, re-add grease to the spindle chain and gear surface.Check the surface of the drum, whether there is clean, whether there is wear on the surface of the drum.
Check the motor, after running for a period of time, see if the surface temperature of the motor is too high. (Temperature within 70 degrees is normal)
4, check the uncoiling and leveling machine box relay, contactor, inverter and other electrical spare parts whether there is loose wire, whether there is the phenomenon of burning black, the surface if the accumulation of dust, please promptly clean up, the wire is fixed, if the phenomenon of burning black, please promptly replace.
5, check the material frame, inside the reducer lubricant, whether in the warning line below, to ensure that the reducer lubricant enough
The third stage is the annual need for maintenance maintenance area
1, firstly doing a good job of daily and weekly maintenance, the uncoiling and leveling machine whole machine inspection.
2, uncoiling and leveling machine reducer lubricant replacement, check the reducer lubricant has no sediment, whether thickened, the colour is black, if there are these kinds of phenomena please change the lubricant.
3, replace the hydraulic oil, check whether the hydraulic oil will have sediment, or the hydraulic oil becomes very thick phenomenon, if there is please replace the hydraulic oil.
4、If the machine is not used for a long time, please coat the surface of the drum with grease to prevent rusting.
Conclusion, in the actual use of the process, extremely important point, the operator should be familiar with mastering the uncoiling and leveling machine or "punching machine feeder use precautions". Many customers are able to follow the above requirements for uncoiling and leveling machine maintenance and maintenance work, in addition to good habits of use. Have not heard of uncoiling leveling machine is not used, are said to be very durable. Well wanting to know more related information,please contact us.
